The Stationary Ebb & Flow Greenhouse Bench for Indoor Farming - 2'W x 4'L provides a fixed, level growing surface with an included ebb and flow plastic tray for tray-based watering. Designed for greenhouse growing, indoor farming, and controlled environment agriculture (CEA) layouts, this 2' wide bench gives customers a narrow bench footprint with commercial greenhouse-style construction, selectable working height, raised aluminum side rails, and a galvanized steel frame. The bench helps keep plants organized while supporting irrigation, drainage, and daily access around the bench layout.

This 2' wide x 4' long stationary bench is a practical size for compact growing areas, perimeter rows, propagation zones, research spaces, and smaller room layouts. The fixed bench design helps keep the growing area organized while maintaining a consistent bench position for crop staging, watering, and daily workflow. Customers can select the bench height from 9" to 36" in 1" increments to match the working height, crop stage, irrigation setup, and room layout.

The bench system is built with a galvanized steel frame and raised extruded aluminum side rails. The side rails help contain the tray and create a defined bench edge, while the frame supports the plastic tray surface used for ebb and flow watering. A leveling header provides up to 2" of adjustment, which helps the bench sit level on uneven slabs. Proper leveling is especially important for tray-based watering because water needs to move evenly across the tray during fill and drain cycles.

Key Features:

• Fixed Stationary Bench Layout: Provides a stable growing surface for customers who want a consistent bench position for greenhouse, indoor farming, and CEA layouts.
• Included Ebb & Flow Plastic Tray: Comes with the standard plastic tray configuration used for flood and drain watering applications.
• Narrow 2' Bench Width: Compact width works well for tighter layouts, perimeter runs, propagation areas, research spaces, and growing areas where access around the bench is important.
• 4' Bench Length: Provides a 4' long fixed bench run that can be used on its own or combined with other bench sizes for larger room designs.
• Selectable Working Height: Bench height can be selected from 9" to 36" in 1" increments to match operator preference, crop stage, and facility layout.
• Galvanized Steel Frame: 1" tubing provides the main frame structure for greenhouse and indoor farming bench layouts.
• Raised Aluminum Side Rails: Extruded aluminum rails sit 3" above the bench surface to help contain trays and define the growing area.
• Leveling Header: Up to 2" of adjustment helps the bench sit level on uneven floors and supports more consistent tray performance.
• Tray Support Structure: Bench design supports the plastic tray surface used for ebb and flow watering and plant organization.
• Optional Plant Support Compatibility: Compatible with plant support and trellis components when additional crop support is needed.
• Pre-Drilled & Pre-Cut Components: Components arrive prepared for assembly with included fasteners to reduce on-site fabrication.

How the Ebb & Flow Tray Works:

• Flood Cycle: Water or nutrient solution is introduced into the plastic tray so plant containers can absorb moisture from below.
• Root Zone Soaking: The tray can hold approximately 1" of water during the watering cycle, allowing containers to soak through the bottom of the root zone.
• Drain Cycle: After watering, the tray drains so water does not remain standing on the bench surface between cycles.
• Level Surface Requirement: A level bench helps water distribute and drain more evenly, which is why leveling adjustment matters for ebb and flow applications.

This stationary ebb and flow greenhouse bench can be used in greenhouse growing, indoor farming rooms, propagation areas, commercial cultivation facilities, and controlled environment agriculture (CEA) operations where a fixed bench system is preferred.

Custom bench configurations and layout support are also available. For custom options, project assistance, or questions about the best bench setup for your facility, email us or call 866-285-8646 for more information.