The Standard Rolling Ebb & Flow Greenhouse Bench for Indoor Farming - 6'W x 96'L provides a rolling tabletop with standard side-to-side travel and an included Ebb & Flow Tray for tray-based watering. Designed for greenhouse growing, indoor farming, and controlled environment agriculture (CEA) layouts, this 6' wide bench gives customers a wide 6' growing surface for high-capacity bench rows, larger canopies, and commercial greenhouse layouts. The rolling top helps open aisle access between bench rows while maintaining commercial greenhouse-style construction, selectable working height, raised aluminum side rails, and a galvanized steel frame.

This 6' wide x 96' long standard rolling bench is built for long production runs, larger greenhouse bays, and high-density CEA layouts. The tabletop provides 11.5" of side-to-side travel, allowing growers to shift the growing surface laterally for daily crop access, watering, pruning, scouting, and room maintenance. Unlike track-based bench systems, the Standard Roll design does not require a floor track, helping facilities add bench mobility without converting the room to a full track system.

The bench system is built with a galvanized steel frame and raised extruded aluminum side rails. The side rails help contain the tray and create a defined bench edge, while the frame supports the Ebb & Flow Tray used for flood and drain watering. A leveling header provides up to 2" of adjustment, which helps the bench sit level on uneven slabs. Proper leveling is especially important for ebb and flow applications because water needs to move evenly across the tray during fill and drain cycles.

Key Features:

Standard Rolling Bench Layout: Rolling tabletop design helps create working aisle access between bench rows while keeping the bench system organized for greenhouse, indoor farming, and CEA layouts.
Included Ebb & Flow Tray: Comes with the tray surface used for flood and drain watering applications.
6' Bench Width: Provides a wide 6' growing surface for high-capacity bench rows, larger canopies, and commercial greenhouse layouts.
96' Bench Length: Provides a 96' long bench run that can be used on its own or combined with other bench sizes for larger room designs.
11.5" Standard Roll Travel: Tabletop slides side-to-side with the manufacturer-listed standard roll distance for this bench width.
No Floor Track Required: Standard Roll benches provide tabletop movement without the floor track required by tracked bench systems.
No Floor Anchoring Required: Standard Roll benches are not required to be anchored to the floor, simplifying installation and future layout changes.
Selectable Working Height: Bench height can be selected from 9" to 36" in 1" increments to match operator preference, crop stage, and facility layout.
Galvanized Steel Frame: 1" tubing provides the main frame structure for greenhouse and indoor farming bench layouts.
Raised Aluminum Side Rails: Extruded aluminum rails sit 3" above the bench surface to help contain trays and define the growing area.
Leveling Header: Up to 2" of adjustment helps the bench sit level on uneven floors and supports more consistent tray performance.
Optional Plant Support Compatibility: Compatible with plant support and trellis components when additional crop support is needed.
Pre-Drilled & Pre-Cut Components: Components arrive prepared for assembly with included fasteners to reduce on-site fabrication.

How the Ebb & Flow Tray Works:

Flood Cycle: Water or nutrient solution is introduced into the tray so plant containers can absorb moisture from below.
Root Zone Soaking: The tray can hold water during the watering cycle, allowing containers to soak through the bottom of the root zone.
Drain Cycle: After watering, the tray drains so water does not remain standing on the bench surface between cycles.
Level Surface Requirement: A level bench helps water distribute and drain more evenly, which is why leveling adjustment matters for ebb and flow applications.

This standard rolling ebb and flow greenhouse bench can be used in greenhouse growing, indoor farming rooms, propagation areas, commercial cultivation facilities, and controlled environment agriculture (CEA) operations where side-to-side tabletop movement is preferred. Custom bench configurations and layout support are also available. For custom options, project assistance, or questions about the best bench setup for your facility, email us or call 866-285-8646 for more information.

SKU: SMS-857-V164-SR6FX96FPT

Standard Rolling Ebb & Flow Greenhouse Bench for Indoor Farming - 6'W x 96'L

Name: Standard Rolling Ebb & Flow Greenhouse Bench for Indoor Farming - 6'W x 96'L
SKU: SMS-857-V164-SR6FX96FPT
Price: 5389.84 USD
Availability: InStock

★★★★★ 4.9 Google Reviews

Product Description

Price

$5,389.84

QTY

Adding to cart… The item has been added

BBB Accredited Business: A+ | Secure Checkout

Enter a Zip

Questions? We're here to help. Call 866-285-8646 or email us.

Overview

Product Description

Specifications

Spec Table

Warranty	Manufacturer's Limited Warranty
Product Length	1152''
Product Weight	1455 lbs
Material	Steel
Product Type	Standard Rolling Ebb & Flow Greenhouse Bench
Bench Configuration	Standard Roll
Bench Movement	Rolling tabletop with 11.5 in. side-to-side travel
Core Material	Galvanized Steel
Floor Anchoring	Not required
Floor Track Required	No
Frame Material	Galvanized Steel
Frame Tubing	Steel Tubing
Leveling Adjustment	Up to 2"
Made to Order	Yes
Roll Distance	11.5 in
Selectable Bench Height	9" to 36" in 1" increments
Side Rail Height	3" Above Bench Surface
Side Rail Material	Extruded Aluminum
Tray Type	Ebb & Flow Tray
Watering Method	Ebb & Flow/Flood and Drain

Dimensions & Weight

Width	1152 inches
Depth	72 inches
Weight	1455 lbs

Documents

Brochure

Care & Maintenance

SpecSheet

Standard Rolling Ebb & Flow Greenhouse Bench for Indoor Farming - 4'W x 96'L

$4,371.49

The Standard Rolling Ebb & Flow Greenhouse Bench for Indoor Farming - 4'W x 96'L provides a rolling tabletop with standard side-to-side travel and an included Ebb & Flow Tray for tray-based watering...